Compact and portable for the ultimate travel rig. The HX Stomp gives you top notch features and a great layout.

The Line 6 HXStomp is a professional-grade guitar processor that delivers the sound of Helix® amps, cabs, and effects in an ultra-compact pedal. Whether you prefer to play through a traditional amp-and-pedal setup, or go direct onstage or in the studio, this product seamlessly integrates into a variety of environments and applications. Utilizing the same DSP and HX Modeling technology as its bigger Helix brethren, this guitar pedal nonetheless fits easily onto your pedalboard, or even in the pocket of your gig bag. There are over 300 amps, cabs, and effects-including a looper. It contains all the same HX models found in Helix family products, as well as the legacy effects library from Line 6® M-Series pedals, and stompbox modelers such as the DL4™. Use it as a "super stompbox," a backup or travel rig, an add-on tone expander when combined with other modelers, an audio interface-or even a complete guitar or bass rig.

Barely larger than many conventional pedals, this product features over 300 amps, cabs, and effects from Helix, M-Series, and Legacy Line 6 products - up to six simultaneously. Three capacitive-sensing footswitches with color-coded LED rings facilitate easy preset selection and editing. Connect optional footswitches and expressions pedals for even greater control, and integrate your favorite pedals into any preset's signal path by patching them into the two effects loops. You can also dial in amps and effects, save and load presets, and much more with the free HX Edit Application.

This product is both a complete backup solution and the ultimate travel rig. Go direct to FOH or to any backline amp with ease - even use 4 Cable Method. Access up to six amp, cab, effect, and IR blocks simultaneously, so you'll never have to worry about getting the tones you need. You'll even be able to lay down tracks in your hotel room after the show using the built in Audio Interface.

This product offers a wealth of guitar tones in a tiny package - but there's a lot to like for bassists too. From stunning models of Acoustic 360 and Ampeg SVT heads to Mesa/Boogie Powerhouse and Sunn Coliseum cabs to effects such as the Musitronics Mu-Tron III and the Darkglass B7K Ultra - this product covers the bottom end. And this is flexible low end: Send your effected direct signal to the house while feeding a real amp, or create two entirely different signal paths for a dreamy bass tone that will still rattle the rafters.

Play this guitar pedal in the effects loop of your favorite third party modeler or profiler, and you've instantly added over 70 amps and 200 effects to your palette, including classics such as the Fender Bassman, Bogner Uberschall, Klon Centaur, and Maestro Echoplex EP-3. The six processing blocks run in addition to your device's own DSP power, so you gain up to six more simultaneous amps and effects. And in many cases, you can sync presets, tempo, and other parameters using a single MIDI cable.

With a generous 123dB of dynamic range, this product doubles as an ultra-low noise DSP-powered USB audio interface, offering 24-bit/96kHz multi-channel audio - and MIDI connectivity - for Mac and Windows computers. There's also a fleible input impedance circuit for realistic amp and pedal response, and built-in DI and re-amping capabilities. Adding the optional Apple Camera Connection Kit enables you to record directly to your Apple iPhone or iPad.

• Compact Multi-effects processor
• Works with Bass and Guitar
• USB Audio interface for easy recording
• Complete Backup Solution
• Ultimate travel rig

Specifications:

• Looper Types: 1 Switch Looper
• DSP Processor: (1) SHARC ADSP-21469 @ 450 MHz
• A/D/A Converters: 24-bit/192kHz
• Chassis: Cast Aluminum Alloy
• Color LCD: 2.4" Diagonal, 320 x 240-Pixel
• Touch Capacitive Footswitches: 3
• Bypass: Relay or DSP
• Power: DC-3G
• 1/4" Inputs: 4 (Main L/R, Return L/R)
• 1/4" Outputs: 3 (Main L/R, Stereo TRS Send)
• Headphone Output: 1/4" Stereo
• Effect Loop(s): TRS Stereo Send, 2x Return
• Expression Pedal In: EXP 1/2 (TRS; Shared with Footswitch 4/5)
• MIDI Controls: In, Out/Thru
• USB Audio Interface: 8-In, 6-Out with Re-Amping (4 Physical Ins/Outs)
• Input Pad: Line/Inst(rument)
• Variable Impedance: Input L (Mono), Right
• Dynamic Range: 123dB
• Preset Locations: 126 (42 Banks x 3 Presets)
• Snapshots: 3 Per Preset
• Signal Flow Paths: 1 or 2 Stereo
• User or Third-Party Impulse Responses (IRs): 128x 1024 or 2048-Point Mono
• Looper Type: 1 Switch Looper
• Looper Memory (Full-Speed): 60 Sec Mono, 30 Sec Stereo
• Looper Memory (Half-Speed): 120 Sec Mono, 60 Sec Stereo
• Global EQ: 3 Fully Parametric Bands + Variable Low/High Cut Filters
• Footswitch Modes: Stomp, Scroll, Preset, Snapshot
• Number of Controllers: 99 (5 + 94 via MIDI CC)
• MacOS/Windows Editor/Librarian/IR Loader Software: HX Edit
• Dedicated Dry USB Out Channels (for Reamping): 4
• Country of Origin: China
• Product Height (in/mm): 2.6/66
• Product Width (in/mm): 7.01/178
• Product Depth (in/mm): 4.96/126
• Product Weight (lb/kg): 1.75/0.79
• Display Box Height (in/mm): 4.5/114
• Display Box Width (in/mm): 12.3/312
• Display Box Depth (in/mm): 6.9/175
• Display Box Weight (lb/kg): 3.4/1.5